[Model Supported] The Rigol DSA705, DSA710, DSA815 and DSA815-TG spectrum analyzers 
[Latest Revision Date] 2024-04-25

[Notice] This firmware does NOT support OTHER DSA800 models which are not listed here. For those models, visit official website of Rigol.


[Update Requirements] 
    ------ Firmware version: 00.01.09 and later
    ------ BOOT version: 00.01.04 and later
    ------ Digital FPGA version: 00.05 and later
    ------ RF FPGA version: 00.05 and later
    ------ Main board version: 00.05 and later


[Updated Contents]

V00.01.19.00.05    2024-04-25

-----Solved S1210 connection to DSA710 will result in partial missing scan traces in the report.    
-----Firmware version changed from 3 segments to full segment display.


[Previous Versions and Updated Contents]

V00.01.19    2024-01-02

-----Continuous minimum function
-----Solved the problem of LAN remote command timeout after opening 3 traces.
-----Modified the trace type for video avergage and power average.
-----Some other bug have been solved   


V00.01.18    2016-09-26

-----Sloved Ultra Spectrum problem
-----Perfect the SSC function
-----From this version, do not support the downgrading operations.
      For special need, please contact RIGOL technical support
      
V00.01.17    2016-08-15

-----Added the SSC function
-----Cleared the LAN communication trouble
-----Solved the front panel switch control problem

V00.01.16    2016-05-18

-----Solved the remote control command problem
-----Solved the problem caused by saving csv data when the horizontal axis is represented in log form
-----Solved the activation code failure problem 

V00.01.15    2015-10-23

-----Added JPEG and PNG format for image saving
-----Added loading the CSV format correction file
-----Cleared the math result error in averaging the power
-----Cleared the LAN communication connection error 
-----Cleared the hops occurred to the tracking source output at 10 MHZ

V00.01.14   2015-06-19

-----Added saving and printing for the invert image
-----Added the screensnap command 
-----Solved the problem concerning the printer
-----Cleared the remote command error for keypad locking 

V00.01.13    2015-02-12

-----Compatible with the 09 version hardware, assisting the neilsbed test and production 
-----Able to automatically modify the filter shape when RBW is 1 MHZ 

V00.01.12     2014-10-15

-----Added the key locking function
-----Added traditional Chinese in the system language
-----Added the command of the remote access to status of the reference
---- Added the sanitation function

V00.01.11     2014-09-04

-----Solved the problem concerning the display of X axis in log form

V00.01.10     2014-05-27

-----Added the frequency offset function
-----Added remote commands that enable the instrument to switch between the local mode and remote mode 
-----Improved the quality of AM demodulation

V00.01.09     2013-11-18

------Upgraded hardware version V05
------Added the "reset and averaging" function for the trace
------Added the correct self-calibration function
------Solved the problem of failing to program the calibration data remotely
------Solved the crash problem caused by trace data reading

V00.01.08  2013-10-29

------Added Korean, Japanese, Portuguese, German, and Polish to the system language 

V00.01.07  2013-04-28

------Solved the problem of spending too long time for storage operation 
------Solved the problem of interface operation failure when outrange occurred to the input signal and gave a warning 

V00.01.06   2012-07-24

------Improved OBW and EBW algorithm 
------Solved the inaccuracy problem when the Zerospan sweep time is 20us

V00.01.05   2012-06-01

------Added the editing function for the relative value of the limit line
------Solved the problem occurred to some instruments: 
      when PA is on, a prompt message indicating the outrange will be displayed. 

V00.01.04   2012-04-01

------Added some remote commands
------Solved the problem: when ATT is 0, PA is on, the amplitude error measured is too big. 

V00.01.03   2012-02-23

------Solved the problem of failing to identify the USB disk
------Solved the problem: unable to start the instrument if you want to restart the instrument during the upgrade process. 

V00.01.02   2012-02-14

------Solved the problem: TG scans only once when RBW is less than 10 KHZ.  

V00.01.01   2011-12-10

------Released the software version officially